Shadow Caddy SC-1000 Manual do Utilizador descarregar pdf (Página 16)

Close the top cover and lock it4. with the

“body lock key”.

Switch the Caddy on (switch is under the 5.

bag support). The operating system on the

Caddy will begin to boot and the brakes will

disengage – you may now manually roll the

Caddy o the base plate.

Look out for the following sequence to

indicate that the Caddy is booting up

correctly:

both LEDs (red and green) are solid i.

during boot up;

a short sequence of beeps is heard to ii.

indicate successful boot up; then

The

RED LED remains on and only the GREEN

LED

goes out when the system has correctly

booted up.

Note: Once the Caddy has nished booting up,

the brakes will re-engage. Should you need to

release the brakes again:

Switch the Caddy o and on again. The •

brakes will be released for approximately 30

seconds during the bootup phase.

Alternatively, disable the brakes by •

manually moving the metal levers at the

front of each motor away from the vertical

position.

Be sure to re-engage the brakes by returning

the levers to the vertical position when you

have nished moving it.

Warning: Remember to return the levers

to the vertical position to re-engage the

brakes before resuming normal operation:

Remember also not to move the Caddy with

the top cover open.

Insert two FULLY CHARGED AA batteries

6.

into the RTU (Radio Transmission Unit) and

close the cover.

The Caddy may now be charged to prepare 7.

it for normal operation

2.4 | How to Use Your Shadow Caddy

N2695 User Manual 12.indd 4 27/11/08 12:26:17 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comentários a estes Manuais

Sem comentários